192.168.80.240 Login — Amped Admin & Password

Log in to your Amped access point or range extender at 192.168.80.240 as admin with password admin. Setup steps, Wi-Fi changes and fixes inside.

I have seen someone type 192.168.80.240 into a browser and stare at a page that never loads. The address looks like a router login, and on the right device it is one.

On most home networks it opens nothing at all, because it belongs to Amped Wireless access points and range extenders, not to the main router. I have the exact login below, plus the steps and the fixes to try when the page will not open.

Open 192.168.80.240 in your browser and sign in with username admin and password admin — that is the default login for Amped Wireless access points and range extenders.

The fastest way in: tap the button below, then sign in with the details in the box.

🔒 192.168.80.240 Admin Login

IP Address: 192.168.80.240

Username: admin

Password: admin

Login to Admin Panel →

This button opens your Amped device’s own login page. It works only when your device is connected to that Amped access point or extender, by WiFi or cable.

192.168.80.240 Default Login Details

I have seen this done wrong more than once, so I keep it simple here.

One brand uses this address, and it is the odd one out in the Amped range. Most Amped routers answer at 192.168.3.1 instead, so check the model name on the label if the page below does not load.

Brand / DeviceLogin AddressUsernamePassword
Amped Wireless AP1200EX192.168.80.240adminadmin
Amped Wireless AP20000G192.168.80.240adminadmin
Amped Wireless APA20192.168.80.240adminadmin
Amped Wireless range extenders192.168.80.240adminadmin

The same address is the setup address for Amped range extenders. That is why most people meet it during setup, not during everyday use.

How to Log In to 192.168.80.240

I start with the connection, because that is where this login fails most often. The page only exists on the Amped device’s own network.

Follow these steps:

  1. Connect your phone or computer to the Amped access point or extender, by WiFi or cable.
  2. Open a browser and type 192.168.80.240 in the address bar.
  3. Enter admin as the username and admin as the password.
  4. Click Log In. The Amped setup page opens.
  5. Change the admin password once you are in, so the default stops working for anyone else.
192.168.80.240 login wifirouterzone.com

Change the WiFi Password on 192.168.80.240

Once you are in, changing the WiFi password takes about a minute. I always change the admin password first, because anyone on the network can otherwise open the same page.

  1. Log in at 192.168.80.240 with admin and admin.
  2. Open Wireless Settings. On extenders, look under Settings, then Wireless.
  3. Type a new network name and password.
  4. Save, then reconnect your devices with the new password.

If you changed the WiFi password before and forgot it, you will need the reset below. See how to change your WiFi password for the full walkthrough.

192.168.80.240 Not Opening?

Nine times out of ten, a dead login page here means the wrong network or the wrong address.

  • Join the Amped network first. Your device must be on the access point or extender’s network. If you are on your main router’s WiFi instead, the page cannot load.
  • Check the address. Your main router is usually at 192.168.1.1, not 192.168.80.240. If you are unsure which one is your router, our Router IP Finder walks you through it.
  • Forgot the password? Press and hold the reset button on the Amped device for about 10 seconds, then try admin and admin again. A reset erases every setting, so you will set the device up again.

FAQs About 192.168.80.240 Login

The default username is admin and the default password is admin, for Amped Wireless access points and range extenders.

It is the setup and login address for Amped Wireless access points such as the AP1200EX, AP20000G and APA20, and for Amped range extenders.

You are probably not connected to the Amped device’s network, or your main router uses a different address. Join the Amped WiFi first, then try again.

Press and hold the reset button for about 10 seconds, reconnect to the extender’s network, then open 192.168.80.240 and sign in with admin and admin.

The team behind this guide
Grace Muller

Grace Muller found this topic
Content Strategist
Focus: Topic Planning & Coverage

Daniel Reed

Daniel Reed wrote this guide
Content Writer · Published November 16, 2026
Focus: WiFi Troubleshooting

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts