192.168.0.200 Admin Login: Netgear ME101 Guide

One old Netgear bridge answers at 192.168.0.200, but on most home networks the address belongs to a device. This guide covers the login and find-it steps.

You typed 192.168.0.200 into your browser and the page never loaded, or your network list showed the address and you want to know what sits behind it. I have been there: a high address like this looks like a router login waiting to open. Most of the time it is not your router at all — but one old Netgear bridge does use it, and this guide shows you how to tell which case you have.

This guide gives you the 192.168.0.200 login for the Netgear ME101, the steps that get you in, and how to find the device behind this address on any other network.

192.168.0.200 is the factory address of the Netgear ME101 wireless bridge, which logs in with the username admin and the password password. On most home networks it is just a device address — your router usually answers at 192.168.0.1 instead.

The fastest way in: tap the button below, then sign in with the details in the box. It works only if the device at this address is an ME101 or a device set to use it.

🔐 192.168.0.200 Admin Login

IP Address: 192.168.0.200

Username: admin

Password: password

Login to Admin Panel →

This button opens the device at 192.168.0.200 directly. It works only when your device is connected to that network, by WiFi or cable. If nothing loads, the address is probably a device on your network, not a router — see the find-it steps below.

Addresses in the 192.168.0.0/24 network

AddressRole
192.168.0.0Network address (not usable)
192.168.0.1Usually the router
192.168.0.2 to 192.168.0.254Devices (includes most uses of this address)
192.168.0.200Netgear ME101 factory address (see below)
192.168.0.255Broadcast address (not usable)
255.255.255.0 or /24Subnet mask

What 192.168.0.200 is

A private address is how devices on your home network talk to each other. Your laptop uses one to reach your printer, and it only works inside your network.

I treat any 192.168.0.x address as part of a network that uses the 0 range instead of the usual 1 range. That habit has saved me from chasing login pages that do not exist.

192.168.0.200 ethernet cables network close-up wifirouterzone.com
A home router hands out addresses like 192.168.0.200 to its devices.

The one documented exception is the Netgear ME101 802.11b Wireless Ethernet Bridge, a small box from 2003 that gave a wired device — a PC, a game console, a set-top box — a wireless connection. Netgear’s own manual prints 192.168.0.200 as its factory address, with the user ID admin and the password password.

On a normal home network the address is a device instead. Routers hand out high addresses like this to printers, cameras, NAS drives and smart-home hubs, because a fixed address suits a device that never moves.

No fixed username or password belongs to the address itself — the login belongs to the device that holds it.

How to log in to the Netgear ME101 at 192.168.0.200

I start with a cable, because the ME101 is a bridge and its setup works best over a wired connection.

  1. Connect your computer to the ME101 with an Ethernet cable. The bridge shipped with a crossover cable for this job.
  2. Open a browser and go to http://192.168.0.200. Type the address into the address bar, not the search bar.
  3. Type admin as the User ID and password as the Password, then click Login.
  4. Change the password on the Change Password page before you do anything else.
  5. Pick your wireless network name and security settings, then save.

If you run two ME101 units on one network, only one can keep the default address — Netgear’s manual says so plainly. I give the second bridge its own address first, then configure it.

How to find which device has 192.168.0.200

  1. On Windows, open Command Prompt and run ipconfig, then read the Default Gateway line. That address is your router — if it says 192.168.0.200, the address is your gateway.
  2. Log in to your router at its gateway address and open the connected devices or DHCP client list. Find 192.168.0.200 and read the device name next to it.
  3. On a Mac or phone, open your Wi-Fi network details to see your own address and the router address. It is only 192.168.0.200 if that device holds it.

If you want your public address instead, open our What Is My IP tool.

Not sure which address is your router? Our Router IP Finder walks you through it step by step.

When typing 192.168.0.200 does something

Most of the time nothing loads, and that is the expected result. A few devices answer with a web page of their own, and one case is different: if the device at this address is an ME101, the bridge login page opens.

  • Printers: many show a status page with ink levels and print jobs.
  • Security cameras: some show a live view or a settings page.
  • NAS drives: some show a file login page.
  • Netgear ME101: the bridge shows its admin login page, with admin and password as the factory pair.

If the ME101 login page opens, sign in with admin and password, then change the password right away. I change it first because the manual prints the factory password for anyone to read.

Common mistakes and typos

A single wrong digit sends you to a different device or nowhere at all.

  • 192.168.0.20: a missing zero at the end — a different device on your network.
  • 192.168.0.2: two missing zeros — a different address entirely.
  • 192.168.0.2000: an extra zero at the end. No part of an address goes above 255.
  • 192.168.o.200: the letter o typed instead of the digit 0. This is the most common typo of all.
  • 192.168.0.2oo: the letters oo typed instead of the digits 00.
  • 192.168.0.200.1: an extra part at the end. No address has five parts.

Type the address exactly, with dots and no spaces. If the page still will not load, the address is probably not your router.

192.168.0.200 problems users report, and what fixed them

Netgear AP setup page will not load

For Netgear access points that will not respond, a Netgear employee told owners to set the PC to a static 192.168.0.200, connect it alone to the AP by cable, and ping the AP first. See Netgear Community thread.

Bridge stops working after changing ISP

A Netgear owner’s bridge broke when his new ISP network used 192.168.1.x instead of 192.168.0.x. Devices set for the old range must be moved to the new one. See Netgear Community thread.

Bridge connects but the console has no internet

The ME101 manual’s troubleshooting step is to power off all devices, then start the router or AP first and the bridge second. See Netgear ME101 manual.

FAQs About 192.168.0.200 Admin Login

The Netgear ME101 logs in at 192.168.0.200 with the username admin and the password password. That pair comes from Netgear’s own ME101 user manual. On any other device at this address, the login is the one on that device’s label.

192.168.0.200 is a private IP address inside the 192.168.0.0/24 home network. It is the factory address of the Netgear ME101 wireless bridge, and on most home networks it is a device address handed out to a printer, camera, NAS drive or smart-home hub.

Only if the device at the address is a Netgear ME101 or a device set to use this address. Check your Default Gateway first with ipconfig on Windows or your Wi-Fi details on a phone. If the gateway is a different address, 192.168.0.200 has no login page of its own.

On the Netgear ME101 the username is admin and the password is password, straight from the Netgear manual. There is no fixed pair for the address itself, so on any other device the login comes from that device’s label or its own manual.

Open your router’s connected devices or DHCP client list and look for 192.168.0.200 next to a device name. On Windows, run ipconfig and read the Default Gateway line to see whether it is your router.

The team behind this guide
Kevin Doyle

Kevin Doyle found this topic
SEO Research Lead
Focus: Topic & Keyword Research

Jessica Alvarez

Jessica Alvarez wrote this guide
Content Writer · Published November 22, 2026
Focus: Home Networking

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts