Mercusys Router Login: mwlogin.net & 192.168.1.1
Log in to a Mercusys router at mwlogin.net or 192.168.1.1. Login password, Halo mesh, reset steps and fixes.
I have been locked out of my Mercusys login page, and the cause is often small. People type the wrong address, or they try a password that was never set.
mwlogin.net is the page that opens your Mercusys router settings. When it will not open, the fix is often small. This guide walks you through opening it and signing in.
Open mwlogin.net in your browser and sign in with the username and password on your router label.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Mercusys router
In my experience, this is the part that trips most people up.
- Connect your phone or computer to the Mercusys WiFi network, or plug in a network cable.
- Open a browser and go to http://mwlogin.net or http://192.168.1.1.
- Enter the admin username and password. The defaults are below and on the router label.
- Change the default admin password from the administration or system menu.
Mercusys default IP address, username and password
I have seen this done wrong more than once, so I keep it simple here.
| Model or type | Login address | Username | Password |
|---|---|---|---|
| Mercusys routers (MR, AC series) | mwlogin.net / 192.168.1.1 | (not needed) | Created on first login |
| Older Mercusys routers | mwlogin.net / 192.168.0.1 | (not needed) | Created on first login |
| Mercusys Halo mesh | App or mwlogin.net | (not needed) | Created during setup |
Defaults differ by model and firmware. If these do not work, check the label on your router or reset it.
Log in with the Mercusys app
I check this before I change anything else.
The Mercusys app sets up Halo mesh units and many routers, and lets you change the WiFi password and manage connected devices.
Mercusys router login not working?
I treat this as a quick check, not a deep setting.
1. Check your connection
Your device must be connected to the router’s WiFi or plugged in with a cable. Turn off mobile data on phones, because the router page cannot be reached over a cellular connection.
2. Type the address correctly
Type http://192.168.1.1 in the address bar, not the search box. Use only numbers and dots. Do not add www or .com. Our IP Address Checker fixes common typos.
3. Confirm the router IP
Your router may use a different address. Use the Router IP Finder to read the exact Default Gateway from your device.
4. Try another browser or a private window
Clear the browser cache or open a private window. Some browsers force HTTPS, so type http:// at the start.
5. Restart the router
Unplug the router for 30 seconds, plug it back in, wait two minutes and try again.
6. Turn off VPN or proxy apps
A VPN sends your traffic to another network, so your local router cannot be reached until you disconnect it.
How to change your Mercusys WiFi name and password
I would rather confirm it now than fix it later.
- Log in at http://mwlogin.net with the admin username and password.
- Open Wireless, WiFi or WLAN settings. On dual-band routers, edit both the 2.4 GHz and 5 GHz networks.
- Change the SSID to set a new WiFi name.
- Choose WPA2-PSK (AES) or WPA3 security and enter a new password. Our WiFi Password Generator creates a strong one.
- Click Save or Apply, then reconnect your devices with the new password.
How to reset a Mercusys router
I always start with the router page for this.
With the router on, press and hold the Reset or WPS/Reset button for about 6 seconds until the LED changes, then release it. Open mwlogin.net and create a new login password.
Note: a factory reset erases your WiFi name, password and other settings. Keep any internet provider login details ready before you reset.
Mercusys vs TP-Link
In my experience, this is the part that trips most people up.
Mercusys is TP-Link’s budget brand, so if you’ve used a TP-Link router before, Mercusys will feel familiar. The setup page lives at mwlogin.net or 192.168.1.1.
Unlike older routers there’s no admin/admin login. The first time you visit, the router asks you to create a login password, and that’s the one you’ll use from then on. Some Mercusys mesh and WiFi 6 models can also be managed in the Mercusys app.
Mercusys extenders use the same idea: connect to the extender’s network and go to mwlogin.net to set them up.
Settings worth changing on a Mercusys router
I have seen this done wrong more than once, so I keep it simple here.
- Rename your WiFi from the default MERCUSYS_xxxx so it’s easy to recognise.
- Set a strong WiFi password with WPA2-PSK, or WPA2/WPA3 on WiFi 6 models.
- Turn on the guest network for visitors.
- Set up parental controls if you need to limit kids’ devices.
- Check for firmware updates under Advanced, System, Firmware Upgrade.
Forgot the Mercusys login password?
I check this before I change anything else.
Because you created the password yourself during setup, there’s no default to fall back on. Check your browser’s saved passwords first, then your password manager.
If it’s gone, hold the reset button for about 6 to 10 seconds until the LED changes, wait for the restart, and go to mwlogin.net to set up the router again. Write the new password down this time.
