B-Link Router Login: Default IP & Password
Log in to a B-Link router at 192.168.16.1 with admin and admin, check the right address for your model, and fix the login faults owners hit most often.
I have set up B-Link routers for small offices, and the same thing trips owners up every time. The brand also sells as LB-Link, the default address is not the usual 192.168.1.1, and the portable models use a different address again. Your router is online, and the right login depends on the model on the label.
This guide gives you the B-Link login, the model table, and the steps that get you in.
Most B-Link routers log in at 192.168.16.1 with the username admin and the password admin. The portable BL-MP01 and BL-MP02 use 192.168.16.254 instead, and the BL-AP03 uses a numeric password printed in its manual.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.16.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.16.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your model is a BL-MP01 or BL-MP02, use 192.168.16.254 instead.
How to Log in to a B-Link Router
Check the model on the label of your own router before you type anything.
- Connect your computer to the B-Link router with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.16.1. On a BL-MP01 or BL-MP02, go to 192.168.16.254 instead.
- Type admin in the username field and admin in the password field, then click Login.
- On a BL-AP03, leave the username blank and type 111111111111 as the password.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

B-Link Default Username and Password
I have seen this catch owners out: B-Link is one brand with two names, LB-Link and B-Link, and the portable models break the pattern. The table below lists every model I could verify from the hardware databases, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| BL-310R | admin | admin | 192.168.16.1 |
| BL-WR3000 | admin | admin | 192.168.16.1 |
| BL-WR4000 | admin | (blank in one list) | 192.168.16.1 |
| BL-WA01 / BL-LWxx | admin | admin | 192.168.16.1 |
| BL-WDR4600 | admin | admin | 192.168.16.1 |
| BL-MP01 / BL-MP02 | admin | admin | 192.168.16.254 |
| BL-AP03 (KY669A) | (blank) | 111111111111 | 192.168.1.225 |
If your model is not in the table, start with admin and admin at 192.168.16.1. That is the combination the BL-310R ships with, and it is the router most B-Link owners have at home. The default Wi-Fi name starts with B-LINK_ followed by six characters, so check the label if you are unsure which network is yours.
The LB-Link name causes most of the confusion, because shops list the same router under both names. The label settles it: BL and LB-LINK models share the same login table, and the Wi-Fi name on the label starts with B-LINK_ on both. I match the model number, not the shop name.
Change B-Link WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed in the manual for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at your B-Link router’s address with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
The factory Wi-Fi name starts with B-LINK_ and ends in six characters from the label, so your neighbours can guess which network is yours. I rename it to something plain and write the new password down before I save it.
Portable models like the BL-MP01 run on battery and reset their Wi-Fi when they run flat, so I set the password again after a long trip. The admin password survives, because it lives in the saved settings, not in the battery.
B-Link Login Not Working?
- Make sure your device is connected to the B-Link network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the B-Link Wi-Fi.
- Try the right address for your model. Most B-Link routers use 192.168.16.1, but the BL-MP01 uses 192.168.16.254.
- Try admin and admin first, then a blank username with 111111111111 if your model is a BL-AP03.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the small black reset button on the back of the router and hold it for about 10 seconds, then let go.
A reset erases every setting, so you will need to set the router up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most B-Link routers answer at 192.168.16.1 with admin and admin. The portable models and the BL-AP03 are the exceptions, and the label tells you which one you own. Match the model on the label, and the right address is obvious.
B-Link problems users report, and what fixed them
192.168.1.1 does not open
B-Link and LB-Link routers use 192.168.16.1 by default. Type that address instead.
The admin page will not load in my browser
LB-Link’s FAQ says to close every browser tab, quit the browser fully, then open it again and enter 192.168.16.1. See LB-Link: FAQ.
Which password does B-Link use
Most B-Link routers use admin as the password, and some models ask only for a password with no username field. The label under the router shows yours.










