Cudy Router Login: IP, Username and Password
Log in to Cudy at 192.168.10.1 or cudy.net with admin or the password set during setup.
Connect to your Cudy router first by WiFi or cable. You can also use cudy.net.
Cudy routers, mesh systems and extenders open their settings at 192.168.10.1 or http://cudy.net.
Older firmware used admin and admin. Newer firmware asks you to create a password the first time you log in. Here is how to log in, change WiFi and reset.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Cudy router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.10.1 in the address bar. Or open http://cudy.net.
- Enter the username and password from the table below or the router label.
- Once logged in, change the admin password and use WPA2 or WPA3 for WiFi.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
The cudy.net shortcut is the address I try first when the IP will not open.
Cudy default IP, username and password
| Model or type | Login address | Username | Password |
|---|---|---|---|
| Cudy routers (WR, X6, WR3000) | 192.168.10.1 or cudy.net | admin | admin or set at setup |
| Cudy mesh (M1300, M3000) | 192.168.10.1 | admin | Set at setup |
| Cudy extenders (RE series) | 192.168.10.1 or cudy.net | admin | Set at setup |
| 4G/5G routers (LT, P5) | 192.168.10.1 | admin | On the label or admin |
If you set a password during setup, use it. Otherwise try admin. The set-at-setup password is the one I ask about before I try admin.
How to change the WiFi password on a Cudy router
- Log in at cudy.net.
- Open Wireless, then the 2.4G or 5G settings.
- Change the SSID and key with WPA2-PSK or WPA3.
- Save and Apply.
Mesh units sync the change automatically. Need a strong key? Try our WiFi Password Generator. For me, the Wireless page is where every Cudy WiFi change starts.
Cudy login problems and fixes
- 192.168.10.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
The VPN-off check is the first fix I try when the page stays blank.
How to reset a Cudy router
- Keep the router powered on.
- Press and hold the reset button for about 6 to 10 seconds, until the lights flash.
- Release and wait 2 to 3 minutes.
- Log in with the default details and set up WiFi again.
Cudy also supports OpenWrt on some models. A reset returns to stock settings only. When I reset a Cudy, the 6-to-10-second hold is the timing I watch.
Cudy routers and mesh
Cudy is a newer budget brand that offers good value WiFi 6 routers, mesh systems and 4G/5G routers. Its web page is at cudy.net or 192.168.10.1, and most models ask you to set a password on first login. The Cudy App manages the same settings from your phone.
Cudy firmware is based on OpenWrt, which makes it popular with tinkerers. Some models officially support switching to standard OpenWrt firmware. I treat Cudy’s OpenWrt roots as the reason tinkerers pick the brand.
Settings to check on a Cudy router
- Set a strong admin password during setup.
- Turn on WPA2/WPA3 if available.
- Enable automatic firmware updates, or check manually under System, Firmware.
- Set up the guest network for visitors.
- For 4G/5G models, check the APN matches your SIM card provider.
The guest-network step is the one I never skip on a Cudy setup.
Cudy mesh setup
Cudy mesh units pair with the main router through the web page or a pairing button. Place satellites one or two rooms away from the main unit, and use Ethernet backhaul where you can for the best speed. The one-or-two-rooms rule is the placement tip I give first for mesh satellites.
Cudy 4G and 5G routers
Cudy’s LTE and 5G routers take a SIM card and share mobile internet over WiFi and Ethernet. They’re popular as backup internet or for places without fixed broadband. Check signal strength in the web page and place the router near a window for the best results.
The near-a-window spot is the placement I try first for any 4G or 5G router.
Install OpenWrt on a supported Cudy
Some Cudy models officially support standard OpenWrt firmware. This is for confident users only:
- Check the OpenWrt table of hardware for your exact model and version.
- Download the official Cudy intermediate firmware if required.
- Follow the model-specific guide carefully.
- Keep the original firmware file in case you want to go back.
The keep-the-original-firmware rule is the step I never skip with OpenWrt.
