192.168.30.1 Login — Admin Username & Password

Log in at 192.168.30.1 with your brand’s default login — most commonly admin and Motorola for the Motorola WE800G. Brand table, steps and fixes inside.

I have watched people type 192.168.30.1 into a browser, reach a login page, then get stuck on the password.

The address is a real router gateway, but it belongs to several brands at once, and each brand ships with its own login. Motorola, Ruckus, NetComm and Ubiquiti all use it, so the password depends on the box on your shelf. I have the full list below, plus the steps and the fixes to try when the page will not open.

Open 192.168.30.1 in your browser and sign in with the login for your brand — most commonly admin and Motorola for the Motorola WE800G. If that pair does not work, check the table below.

The fastest way in: tap the button below, then sign in with the details in the box.

🔒 192.168.30.1 Admin Login

IP Address: 192.168.30.1

Username: admin

Password: Motorola

Login to Admin Panel →

Most common login for this address (Motorola WE800G). Other brands differ — check the table below. This button opens your router’s own login page, and it works only when your device is connected to this router, by WiFi or cable.

192.168.30.1 Default Login Details

I have seen this done wrong more than once, so I keep it simple here. Find your brand in the table and use its row, not someone else’s.

Brand / DeviceLogin AddressUsernamePassword
Motorola WE800G192.168.30.1adminMotorola
Ruckus 2211-EXT192.168.30.1adminpassword
Ruckus MediaFlex 7211 / ZoneFlex R500192.168.30.1supersp-admin
NetComm V200 / V300192.168.30.1adminadmin
Ubiquiti EdgeRouter / UniFi192.168.30.1ubntubnt
OutdoorRouter EZR33 / EZR3X192.168.30.1rootroot or admin

The Motorola WE800G is the most common device on this address, which is why admin and Motorola is the first pair to try. If your router is a different brand, its row is the one that counts.

For the full Motorola walkthrough, see our Motorola login guide.

How to Log In to 192.168.30.1

I start with the connection, because that is where this login fails most often. The page only exists on your router’s own network.

Follow these steps:

  1. Connect your phone or computer to the router’s WiFi, or plug in a cable.
  2. Open a browser and type 192.168.30.1 in the address bar.
  3. Enter the username and password for your brand from the table above.
  4. Click Log In. The router settings page opens.
  5. Change the admin password once you are in, so the default stops working for anyone else.
192.168.30.1 login wifirouterzone.com

Change the WiFi Password on 192.168.30.1

Once you are in, changing the WiFi password takes about a minute. The exact menu name depends on your brand, so I keep the steps general here.

  1. Log in at 192.168.30.1 with your brand’s login from the table above.
  2. Open the wireless or WiFi settings. On Motorola look under Wireless, on Ruckus under Configuration, on NetComm under Wireless Settings.
  3. Type a new network name and password.
  4. Save, then reconnect your devices with the new password.

If you changed the WiFi password before and forgot it, you will need the reset below. See how to change your WiFi password for the full walkthrough.

192.168.30.1 Not Opening?

Nine times out of ten, a dead login page here means the wrong network or the wrong address.

  • Join the router’s network first. Your device must be on the router’s WiFi or cable. If you are on another network, the page cannot load.
  • Check the address. Your router may use a different gateway, most often 192.168.1.1. Check the Default Gateway line on your device to be sure.
  • Forgot the password? Press and hold the reset button on the router for about 10 seconds, then try your brand’s default login again. A reset erases every setting, so you will set the WiFi up again.

FAQs About 192.168.30.1 Login

It depends on your brand. The most common pair is admin and Motorola, for the Motorola WE800G. Ruckus uses admin and password or super and sp-admin, NetComm uses admin and admin, and Ubiquiti uses ubnt and ubnt.

Motorola WE800G, Ruckus 2211-EXT and MediaFlex 7211, NetComm V200 and V300, Ubiquiti EdgeRouter and UniFi hardware, and OutdoorRouter EZR33 and EZR3X units.

You are probably not connected to that router’s network, or your router uses a different gateway address. Join the router’s WiFi first, then check the Default Gateway on your device.

Press and hold the reset button for about 10 seconds, wait for the router to restart, then sign in with your brand’s default login from the table above.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Ethan Brooks

Ethan Brooks wrote this guide
Content Writer · Published November 16, 2026
Focus: Networking Basics

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts