172.16.0.1 Login: IP, Username and Password

Log in to 172.16.0.1 with admin and admin or the login your admin set. What the 172.16 range is, fixes and typos.

ROUTER LOGIN
172.16.0.1
Open login pageNot your IP?
Default usernameadmin
Default passwordadmin
Common onBusiness routers, firewalls

The page opens only on a device connected to that router. Check the sticker on your router for its exact login. More defaults: Default Router Password List.

172.16.0.1 is a private IP address that some routers, firewalls and office networks use as their gateway. It is less common at home than 192.168.1.1, but you will see it on business gear and on networks set up by IT teams.

If your device lists 172.16.0.1 as its gateway, this is where the admin panel lives. Here is how to log in, what defaults to try, and how to fix connection problems. This is the admin access page for the router.

The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.

How to log in to 172.16.0.1

Logging in takes less than a minute when your device is on the right network. Follow these steps in order: This setup guide covers the login, the defaults, and the fixes.

  1. Connect your phone or computer to the router by WiFi or with an Ethernet cable. Mobile data will not reach 172.16.0.1.
  2. Open any browser and type http://172.16.0.1 in the address bar, not the search box.
  3. Enter the admin username and password. Try the defaults in the table below, or the ones printed on the router label.
  4. Once you are in, change the admin password and check that WiFi security is set to WPA2 or WPA3.

If the page never loads, your router probably uses a different address. Run our Router IP Finder or check the “Default Gateway” on your device before trying again.

Default username and password for 172.16.0.1

Defaults depend on the brand and model. These are the combinations most often reported for devices that use 172.16.0.1:

UsernamePasswordNotes
adminadminMost reported default
adminpasswordCommon alternative
admin(blank)Some small business routers
(blank)adminLeave the username empty

Most routers made in the last few years print a unique password on the label instead of a shared default. If none of these work and the password was changed, a factory reset brings back the label defaults.

Why your router uses 172.16.0.1

The 172.16.0.0/12 block covers 172.16.0.0 to 172.31.255.255. It is the middle of the three private ranges defined for local networks, next to 10.0.0.0/8 and 192.168.0.0/16.

Network admins often pick 172.16.x.x to avoid clashing with home networks on 192.168.x.x. That matters for VPN users: if both sides use 192.168.1.x, traffic gets confused, while 172.16 keeps them apart.

Docker and some virtual machine tools also create 172.17.x.x or similar networks on your computer. Those are virtual and are not your router.

Brands and devices that use 172.16.0.1

172.16.0.1 is not tied to one manufacturer. It is reported as the default or common gateway on these brands and ISP devices:

  • Small business routers and firewalls configured by IT teams
  • Some D-Link, Cisco and Ubiquiti setups
  • Hotel, campus and office WiFi gateways
  • Custom home networks set up to avoid VPN conflicts

Your exact model decides the address, so the label on the router or its manual is the final word.

How to check that your router really uses this IP

Before you troubleshoot the login page, confirm the gateway address on the device you are using:

  • Windows: open Command Prompt, type ipconfig and read the “Default Gateway” line.
  • Mac: open System Settings, Network, your connection, Details, then TCP/IP and read “Router”.
  • Android: open WiFi settings, tap the connected network, and look for Gateway or Router.
  • iPhone and iPad: Settings, Wi-Fi, tap the (i) next to your network, and read Router.

172.16.0.1 not working? Fixes that work

When the address times out or keeps refusing your password, work through these checks:

  • Wrong network: make sure you are on the router WiFi, not mobile data, a guest network or a VPN.
  • Wrong address: confirm the default gateway using the steps above. Many routers use 192.168.1.1 or 192.168.0.1 instead.
  • Browser issues: type http:// in front, try a private window, or use another browser.
  • Wrong password: check the label, then try the table above. Passwords are case sensitive.
  • Router not responding: restart it, wait two minutes, and try again with a cable if you can.
  • Locked out: hold the reset button for about 10 seconds to restore factory settings. This erases your WiFi name and password.

Still stuck? Our full guide on a router login page that will not open covers every cause.

Common typos of 172.16.0.1

A single wrong character sends you to a search page instead of your router. These are the mistakes people make most often when typing 172.16.0.1:

  • 172.16.o.1 is not valid. The letter o replaces the zero.
  • 172.16.0.l is not valid. The letter l replaces the final 1.
  • 172.168.0.1 is not valid. An extra 8. This is a public address, not private.
  • 172.16.1 is not valid. An IP address needs four parts.
  • 172.16.0.1. is not valid. A trailing dot can break the address.

Type the address exactly as 172.16.0.1 with dots, no spaces and no letters, then press Enter. Adding http:// in front stops the browser from treating it as a search.

Frequently Asked Questions

Is 172.16.0.1 a private IP address?

Yes. Everything from 172.16.0.0 to 172.31.255.255 is a private range that only works inside local networks.

What is the default password for 172.16.0.1?

There is no single default because many different devices use it. admin and admin is the most common. Check the label or ask your network admin.

Why is my gateway 172.16.0.1 at work or a hotel?

Business and guest networks often use the 172.16 range. You usually cannot log in to those gateways, since they are managed by the network owner.

Why does 172.16.0.1 not open?

The router may block web access, use HTTPS only, or your gateway is a different address. Try https://172.16.0.1 and confirm your Default Gateway.

Is 172.16.0.1 related to Docker?

Docker usually creates a virtual 172.17.0.1 network on your computer. That is separate from your router gateway.

The team behind this guide

Grace MullerGrace Muller found this topic
Content Strategist
Focus: Topic Planning & Coverage

Liam FosterLiam Foster wrote this guide
Content Writer · Published October 20, 2026
Focus: Firmware & Updates

Nina PetrovaNina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

AwaisAwais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts